Skip to main content
RSK450Ni
A
Written by Anastassis Touros
Updated over 8 months ago

The RSK450Ni is designed for monitoring AIS signals near the shore and represents the latest generation of MarineTraffic AIS receivers since the beginning of 2024.

This device features a dual-channel synthesised VHF receiver and is powered by the newest Raspberry Pi mini computer. Equipped with built-in Ethernet, WiFi, and USB interfaces, it can easily connect to any wired or wireless network and stream data to up to five user-defined destinations, excluding the reserved MarineTraffic data stream.

The unit is capable of receiving and decoding all AIS transmissions from vessels equipped with Class A or Class B AIS transceivers, as well as AIDS to Navigation and SART. You can utilize the receiver's web UI for local plotting or use software on your computer for visualisation.

Technical Information

Receiver

  • 2 Channel SRT AIS receiver,
    for 161.975 MHz and 162.975 MHz

  • Class A/B, Adjacent Channel Selectivity 70dB, blocking >90dB

Sensitivity

  • > -112 dBm for 20% MER

Power

  • 7 - 36V DC, 24W, Power Connector

Operating Temperature

  • -15°C to +55°C

Connector

  • BNC 50Ω for antenna

  • RJ45 Ethernet Connector

  • Wifi

  • USB 2.0 Connector

  • HDMI

LED

  • Power LED

  • Active LED

  • Network Port LEDs

Output

  • NMEA0183, 38.400 Baud, VDM

Protocol

  • TCP, UDP, ARP, ICMP, TFTP, Telnet, DHCP, BOOTP, HTTP, AUTOIP

Dimensions

  • 95x90x28 mm

Weight

  • 400 g

Wiring Diagram

LED Status

The Power LED shows that the device is on. If no green light appears, recheck the power connection.

The orange and green LED on the network port is off if no network cable is connected or nothing is connected to the other end of the network cable. In this case, check the network cable and the connection.

The orange LED on the network port is permanently on when a connection has been established to a network device (e.g., switch).

The green LED on the network port flashes when a connection has been established (see orange LED). It does not mean that the data is being transmitted to MarineTraffic.

Did this answer your question?